| |
Pillar Drilling Machine - P4 / 40 |
|
Specification - All Dimensions are in"mm" |
| Drilling Capacity in Steel |
40 |
|
|
| Morse taper in Spindle |
MT4 |
|
|
|
| Distance between Spindle and Pillar front |
325 |
|
| Max. Distance between Spindle and Table |
575 |
|
| Max. Distance between Spindle and Base |
1080 |
|
| Table Working Surface |
Ø 390 |
|
| Base Working Surface |
400 x 350 |
|
|
| Range of Spindle Feeds |
110 -155 - 225 - 320 - 460 |
|
| Range of Spindle Speeds |
Auto / Hand |
|
|
| No.of Spindle Feeds |
0.095-0.285-0.19 |
|
| Range of Spindle Feeds |
400 / 440 V, Ac 3 Phase |
|
| Power Drive Motor |
50 Cycles |
|
| Space Occupied [LxBxH ] |
1090 x 650 x 2035 |
|
|
The Machine will be supplied with motor and Rotary Swith
|
|
| Note: |
- The machine can also be supplied with the following speeds on customer's request at Extra cost.
|
- With 2 HP 1440 rpm motor 165 - 232 - 337 - 480 -690rpm
|
- With 2 HP 720 rpm motor 82 - 116 - 168 - 240 - 345 rpm
|
- With 2 HP 720 / 1140 rpm motor (Double speed motor) 82, 116, 168, 248, 345, 165, 232, 332, 480, 690 rpm.
|
- The drilling head is fixed and table only can be moved Up & Down by means of a hand crank.
|
- The machine can be supplied as gang drilling version also with number of drilling heads over a common table. Specification can be furnished on customer's request.
|
|
|
Note :
The above specification are approximate only. Due to constant improvement, design and speicification are subject to change without notice. |
|
