| |
PILLAR DRILLING MACHINES - PDM / GT |
|
Specification - All Dimensions are in"mm" |
| Specification |
BDM / GT |
PDM / GT |
|
| Drilling Capacity in Steel |
20 |
20 |
|
| Taper Capacity in Steel |
M12 |
M12 |
|
| Morse taper in Spindle |
MT2 |
MT2 |
|
|
| Vertical adjustment of Spindle head |
425 |
425 |
|
| Pillar diameter |
Ø 80 |
Ø 80 |
|
| Distance between center of spindle and Column front |
200 |
200 |
|
| Max. Distance between spindle and table |
340 |
340 |
|
| Max. Distance between spindle and base |
700 |
1200 |
|
| Table working Surface |
Ø 300 |
Ø 300s |
|
| Base Working Surface |
385 X 375 |
385 X 375 |
|
| No. of Spindle Speeds |
10 |
10 |
|
| Range of Spindle Speeds (rpm) |
100-142-210-310-450/600-852-1260-1860-2700 |
|
|
| Power of Spindle drive motor |
0.75kw/1HP,1425 rpm, 400/440 Volt,
AC, 3Phase 50 Cycles |
|
| Space occupied (H X W X L) |
1450 X 460 X 780 |
1850 X 460 X 780 |
|
|
| For Model MT /GT Working Surface |
510 X 175 |
|
|
| |
Cross feed (X xY) |
275 X 175 |
|
|
|
|
The Machine will be Supplied with Motor and Rotary Switch
|
| Extra Equipments |
- Drill Chuck with Arbor & Key
|
|
|
|
|
|
|
|
| Note: |
- The vertical adjustment of spindle head and table are manual.
|
- As per our usual standard supply, the round table provided with coolant channel.
|
- The Machine also available with following speed motors ON CUSTOMERS request.
|
| |
1 HP 960 rpm Motor :- 65-95-140-205-300-390-570-840-1230-1800 rpm |
|
| |
1 HP 720 rpm Motor :- 50-70-105-155-225-300-425-630-930-1350 rpm |
|
| |
Double speed 1 HP 720 / 1440 RPM Motor |
|
|
|
|
Note :
All dimensions and weights are approximate only. We reserve the weights to modify the illustrations and specifications without notice. |
|
