| |
BENCH DRILLING MACHINES - BDM / HD |
|
Specification - All Dimensions are in"mm" |
| Specification |
BDM/HD |
PDM/HD |
|
| Drilling Capacity in Steel |
20 |
20 |
|
| Morse taper in spindle |
MT 2 |
MT 2 |
|
|
| Vertical adjustment of Spindle head |
425 |
425 |
|
| Pillar diameter |
Ø 80 |
Ø 80 |
|
| Distance between center of spindle and Column front |
200 |
200 |
|
| Max. Distance between spindle and table |
340 |
340 |
|
| Max. Distance between spindle and base |
700 |
1200 |
|
| Table working Surface |
Ø 300 |
Ø 300 |
|
| Base Working Surface |
385 X 375 |
385 X 375 |
|
| No. of Spindle Speeds |
5 |
5 |
|
| Range of Spindle Speeds (rpm) |
375-700-1170-1900-3220 |
|
|
| Power of Spindle drive motor |
0.75kw/1HP,1425 rpm, 400/440 Volt,
AC, 3Phase 50 Cycles |
|
| Space occupied (H X W X L) |
1350 X 460 X 780 |
1575 X 460 X 780 |
|
|
The Machine will be Supplied with Motor and Rotary Switch
|
| Extra Equipments at Extra cost |
- Drill Chuck with Arbor & Key
|
|
|
|
|
|
|
|
| Note: |
- The vertical adjustment of spindle head and table are manual.
|
- As per our usual standard supply, the round table provided with coolant channel.
|
- The Machine also available with 2HP 1440 rpm motor ON CUSTOMERS request with extra cost.
|
- As per usual standard supply, the machine will be provided with ON / OFF Rotary type switch only.
|
- The machine can be supplied as Gang drilling version also with number of drilling heads over a common table. Specification can be furnished on customer's request
|
- The above specification data are approximate only. Due to constant improvement, design and specification are subject to change without notice.
|
|
|
Note :
All dimensions and weights are approximate only. We reserve the weights to modify the illustrations and specifications without notice. |
|
